JF231A – HP A-MSR50-60 Multi Service Router – Brand new sealed

HP A-MSR50-60 Multi Service Router – 6 Slots – 4U – Rack-mountable JF231A ****NEW FACTORY SEALED**** Overview HPE MSR50 Series routers are a component of the Hewlett Packard Enterprise FlexBranch solution, which is part of the Hewlett Packard Enterprise FlexNetwork architecture. These routers are designed for large branch offices, regional offices, and enterprise deployments that require high-performance converged routing, switching, wireless, security, voice, and virtualized applications. The MSR50 Series has a rich set of modular WAN, LAN, and voice interface connectivity options, as well as embedded hardwarebased encryption and voice processing. With optional Open Architecture Platform (OAP) modules, it can deliver VMware vSphere, an industry-leading virtualization platform that integrates third-party applications with the router. Key features High-performance, modular LAN/WAN routerConverged routing, switching, wireless, voice, and securityThird-party applications and virtualized services platformEmbedded encryption, firewall, and other security featuresHigh reliability, with available dual power supplies and hot-swappable modules Quality of service (QoS) Traffic policing Supports Committed Access Rate (CAR) and line rateCongestion management Supports FIFO, PQ, CQ, WFQ, CBQ, and RTPQWeighted random early detection (WRED)/random early detection (RED) Delivers congestion avoidance capabilities using queue management algorithmsOther QoS technologies Support traffic shaping, FR QoS, MPLS QoS, and MP QoS/LFI Management Management interface control: provides management access through modem port and terminal interface; provides access through terminal interface, telnet, or SSHIndustry-standard CLI with a hierarchical structure: reduces training time and expenses, and increases productivity in multivendor installationsManagement security: restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide Telnet and SNMP access; local and remote syslog capabilities allow logging of all accessSNMPv1, v2, and v3: provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB) plus private extensions; SNMPv3 supports increased security using encryptionRemote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension groupFTP, TFTP, and SFTP support: FTP allows bidirectional transfers over a TCP/IP network and is used for configuration updates; Trivial FTP is a simpler method using User Datagram Protocol (UDP)Debug and sampler utility: supports ping and traceroute for both IPv4 and IPv6Network Time Protocol (NTP): synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent timeInfo center: provides a central information center for system and network information; aggregates all logs, traps, and debugging information generated by the system and maintains them in order of severity; outputs the network information to multiple channels based on user-defined rulesNetwork Quality Analyzer (NQA): analyzes network performance and service quality by sending test packets, and provides network performance and service quality parameters such as jitter, TCP, or FTP connection delays; allows network manager to determine overall network performance and diagnose and locate network congestion points or failures Connectivity High-density port connectivity: provides up to 10 interface module slots and up to 90 Fast Ethernet portsMultiple WAN and LAN interfaces: provide a traditional link with E3, T3, E1, T1, ADSL, ADSL2, ADSL2+, G.SHDSL, OC-3, POS, ATM, and ISDN/AM backup; deliver high-density Ethernet access with WAN Fast Ethernet/Gigabit Ethernet, LAN Fast Ethernet, and PoE; offer mobility access with IEEE 802.11b/g/n Wi-Fi and 3G3G access support: provides 3G wireless access for primary or backup connectivity via a 3G SIC module certified on various cellular networks; optional carrier 3G USB modems are availableIdeal IP telephony solutions: support FXO, FXS, T1, E1, and BRI in various densities; provide Web browser-based administration, Smart Dial Routing, FXS and FXO 1:1 binding for all ports, Power to Escape to PSTN when IP failures occur, and Enhanced Local MSR SurvivabilityFlexible port selection: provides combination of fiber and copper interface modules, 100/1000BASE-X auto-speed selection, and 10/100/1000BASE-T auto-speed detection plus auto duplex and MDI/MDI-XPacket storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholdsLoopback: supports internal loopback testing for maintenance purposes and an increase in availability; loopback detection protects against incorrect cabling or network configurations and can be enabled on a per-port or per-VLAN basis for added flexibility Performance Excellent forwarding performance: provides forwarding performance up to 800 Kpps/1280 Kpps (for two kinds of engines); meets current and future bandwidth-intensive application demands of enterprise businessesPowerful encryption capacity: includes embedded hardware encryption accelerator to improve encryption performanceFlexible chassis selection: offers a choice of four or six FIC slot routers, meeting different requirements on enterprise branches Resiliency and high availability Hot swappable modules: facilitate the replacement of hardware interface modules without impacting the traffic flow through the systemDual internal power supply: provides high reliabilityVirtual Router Redundancy Protocol (VRRP): allows groups of two routers to dynamically back each other up to create highly available routed environments; supports VRRP load balancing Layer 2 switching Spanning Tree Protocol (STP) fully supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping: effectively control and manage the flooding of multicast packets in a Layer 2 networkPort mirroring: duplicates port traffic (ingress and egress) to a local or remote monitoring portVLANs: support up to 4,094 ports or IEEE 802.1Q-based VLANssFlow: allows traffic sampling Layer 3 routing Static IPv4 routing: provides simple, manually configured IPv4 routingRouting Information Protocol (RIP) uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop protectionOpen Shortest Path First (OSPF) Interior Gateway Protocol (IGP) uses link-state protocol for faster convergence; supports ECMP, NSSA, and MD5 authentication for increased security and graceful restart for faster failure recoveryBorder Gateway Protocol 4 (BGP-4) Exterior Gateway Protocol (EGP) with path vector protocol uses TCP for enhanced reliability for the route discovery process, reduces bandwidth consumption by advertising only incremental updates, and supports extensive policies for increased flexibility, as well as scales to very large networksIntermediate system to intermediate system (IS-IS): Interior Gateway Protocol (IGP) using path vector protocol, which is defined by the ISO organization for IS-IS routing and extended by IETF RFC 1195 to operate in both TCP/IP and the OSI reference model (Integrated IS-IS)Static IPv6 routing: provides simple, manually configured IPv6 routingDual IP stack: maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network designRouting Information Protocol next generation (RIPng): extends RIPv2 to support IPv6 addressingOSPFv3: provides OSPF support for IPv6BGP+: extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressingIS-IS for IPv6: extends IS-IS to support IPv6 addressingIPv6 tunneling: is an important element for the transition from IPv4 to IPv6; allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet; supports manually configured, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnelsMultiprotocol Label Switching (MPLS): uses BGP to advertise routes across Label Switched Paths (LSPs), but uses simple labels to forward packets from any Layer 2 or Layer 3 protocol, thus reducing complexity and increasing performance; supports graceful restart for reduced failure impact; supports LSP tunneling and multilevel stacksMultiprotocol Label Switching (MPLS) Layer 3 VPN: allows Layer 3 VPNs across a provider network; uses MP-BGP to establish private routes for increased security; supports RFC 2547bis multiple autonomous system VPNs for added flexibility; supports IPv6 MPLS VPNMultiprotocol Label Switching (MPLS) Layer 2 VPN: establishes simple Layer 2 point-to-point VPNs across a provider network using only MPLS Label Distribution Protocol (LDP); requires no routing and therefore decreases complexity, increases performance, and allows VPNs of non-routable protocols; uses no routing information for increased security; supports Circuit Cross Connect (CCC), Static Virtual Circuits (SVCs), Martini draft, and Kompella-draft technologiesPolicy routing: allows custom filters for increased performance and security; supports ACLs, IP prefix, AS paths, community lists, and aggregate policies Specification I/O ports and slots 6 FIC slots Telecom FCC part 68; CS-03 Management IMC—Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; RMON1; FTP; IEEE 802.3 Ethernet MIB Physical characteristics Dimensions: 17.17(w) x 16.69(d) x 6.89(h) in (43.6 x 42.4 x 17.5 cm) (4U height)Weight: 44.09 lb (20 kg) Memory and processor RISC @ 1700 MHz, 1 GB DDR SDRAM, 256 MB compact flashRISC @ 833 MHz, 512 MB DDR SDRAM, 256 MB compact flash Mounting and enclosure Mounts in an EIA-standard 19 in. telco rack Performance Throughput: up to 1280 Kpps (64-byte packets)Routing/Switching capacity: 3 GbpsRouting table size: 100000 entries (IPv4), 100000 entries (IPv6) Environment Operating temperature: 32°F to 104°F (0°C to 40°C)Operating relative humidity: 5% to 90%, noncondensingNonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)Nonoperating/Storage relative humidity: 5% to 90%, noncondensing Electrical characteristics Frequency: 50/60 HzMaximum heat dissipation: 1194 BTU/hr (1259.67 kJ/hr)AC voltage: 100 – 240 VACMaximum power rating: 350 WPoE power: 500 W